Caring and Cleaning Tips for Varnished Wood

One of the most common surfaces available in furniture is a varnished wood. They are easy to maintain and durable, which is responsible for its popularity. Varnished wood is also easy to clean and to care for singapore classifieds.

Everyday Care:
Here are some simple tips in caring for varnished wood:

  • You need to protect the varnished wood from water and other liquids, such as alcohol, food or cosmetics.
  • Use soft, dry, lint free cloth for regular cleaning. This removes smudges, dust as well as giving a soft shine to the wood surface.
  • Wipe with a damp cloth to remove stickiness or light soil and then wipe with a dry cloth immediately. Before doing this, test it first in a not noticeable spot, and never leave a damp cloth sitting on the varnished surface.

Special Care:
Once in a while you need to clean your varnished wood furniture more carefully to restore its look and sheen.

  • Apply a coat of paste wax to protect varnished wood. You don’t have to do this regularly and not more than once a year to prevent wax buildup. And by applying wax, this helps protect the varnished wood from dust and moisture.
  • Use a cloth dampened with synthetic turpentine or mineral spirits to remove wax buildup if there is any. Do not use natural turpentine as this could leave a sticky residue. Be sure to follow all label directions when using solvents and do not use it near any, spark, flame, pilot light and absolutely no smoking. Wear rubber gloves to protect your skin and wash it in hot sudsy water before storing. Before disposing the rags you have to air-dry it to evaporate the solvent.
  • You can wash some of the varnished finishes if they are badly soiled but you have to test it first in an inconspicuous area. Do not wash if the surface smudges, or turned white and hazy.
  • If it is safe to proceed, use a solution of lukewarm water and mild detergent. By using a soft cloth or clean sponge wash, rinse and dry a small area at a time. You have to work to avoid over-wetting the surface. Avoid excess water particularly around joints. Polish or wax when it is completely dry.
  • You can use polish to give your furnishing shine but avoid using it regularly as this can cause buildup. Use a silicon-free variety if you are going to use one because silicon can leave a dull film after a while.
  • You can also use oil soaps on some varnish finishes but always test it first in an inconspicuous spot.
You can leave a response, or trackback from your own site.

Leave a Reply